This course is for those who wants to understand Electric Vehicle/Car conductive charging system and its plugs, socket-outlets, vehicle connectors and vehicle inlets in order to chose the right EV and its charging station;

After this course you will know and understand all connectors and vehicle inlets and its configurations (pin, sleeve etc.).

You will learn about:

A.C. charging. Plugs, socket-outlets, vehicle connectors and vehicle inlets;

D.C. charging. Plugs, socket-outlets, vehicle connectors and vehicle inlets.

You will learn the basic about the main International and European standards and law:

The IEC 61851- Electric vehicle conductive charging system ;

The IEC 62196- Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive
charging of electric vehicles ;

The European Directive UE/94/2014, Mandate M/468 and its report.

In this course you will learn about:

General system requirement and interface of Electrical Vehicle charging stations;

Types of Electric Vehicle connection using cables and plugs;

Electric Vehicle charging modes and its active power.

You will understand:

Control Pilot Function. PWM modulation;

Typical charging cycle under normal operating conditions;

RCD – residual current device. Fault Protection;

Vehicle to Grid (V2G) defined as (by IEC 15118-1) plug-in electric vehicle interaction with the electric grid, including charging as well as discharging and bidirectional communication interface;

Electric vehicle battery swap system;

Overview of Electromobility Standards.